If the device Type is Parent or Child, and redirection is enabled, the Redirection Settings table appears at the bottom of the DICOM device editing page. A default redirection setting always exists in the field labeled Default Redirection Rule. This is the normal access URL for the server, used from all accessible IP addresses. The only option here is to select whether this access is via open or secure (HTTP or HTTPS) protocol.
In the field labeled URL Used in Redirection, enter the URL or IP address of this device used during redirection. If left empty, the IP address listed in the devices table is used. In the LAN-accessible IP Addresses for Child Formats table, list the IP address of workstations that will redirect to the URL Used for Redirection address.
|
Field |
Description |
|
Default Redirection Rule |
The default redirection rule. This is the normal access URL for the server, used from all accessible IP addresses. The only option here is to select whether this access is via open (HTTP) or secure (HTTPS) protocol. |
|
URL Used in Redirection |
The URL or IP address of this server used when redirecting. If left empty, the IP address listed in the Devices table is used. |
|
LAN-accessible IP Addresses for Child Formats |
The IP address and address ranges of workstations that use the URL Used for Redirection address when accessing this server. Refer to Local IP Settings for instructions on address domains and exceptions formats. |
After making all changes, click the Save button to save the changes, and restart the DICOM service when prompted.